Northen China is rich of high quality non-ferrous garnet mineral.
The garnet are crushed hard abrasive suitable for water jet cutting machine usage.
We provide mesh grit of M60, M80, M100 and M120.
M60 provides good cutting power and speed, while M80 provides
both good speed and edge. M100 and M120 grades are very fine grit and will yield high quality edge
surface.
Common Characteristics:
Bulk Density: about 140-150lb/ft3
Hardness: > 8.0 Moh
Purity: > 80%
Grain sizes:
M60:
~40% mesh 50 300 micron meter
30-40% mesh 60 250 micorn meter
~10% mesh 70 210 micorn meter
M80:
~10% mesh 50 300 micron meter
~20% mesh 60 250 micron meter
40-60% mesh 80 180 micron meter
~20% mesh 100 150 micron meter
M100:
~10% mesh 60 250 micron meter
10-20% mesh 80 180 micron meter
50-60% mesh 100 150 micron meter
~10% mesh 120 125 micron meter
M120:
~10% mesh 80 180 micron meter
~20% mesh 100 150 micron meter
50-60% mesh 120 125 micron meter
~10% mesh 140 106 micron meter
|
|
|
|
|
Garnet samples are available upon request
FOB China:
M60 USD$300/ton
M80 USD$300/ton
M100 USD$350/ton
M120 USD$350/ton
Minimum order 15 tons. Price may increase without notice. Please call for updates.
FOB Los Angeles, USA:
M60 USD$595/ton
M80 USD$595/ton
M100 USD$695/ton
M120 USD$695/ton
Price may increase without notice. Please call for updates.
Packaged with 25kg (55lb) per bag, see picture below
|
|